Mostrar el registro sencillo del ítem

Título

Switching regulator based on switched-inductor SEPIC DC-DC converter with a continuous input current for lithium-ion batteries

dc.contributor.authorVillanueva Loredo, Juan Antonio
dc.contributor.authorOrtiz López, Ma.Guadalupe
dc.contributor.authorLeyva Ramos, Jesús
dc.contributor.authorDíaz Saldierna, Luis Humberto
dc.date.accessioned2022-03-10T19:33:35Z
dc.date.available2022-03-10T19:33:35Z
dc.date.issued2021
dc.identifier.citationVillanueva-Loredo, JA, Ortiz-Lopez, MG, Leyva-Ramos, J, Diaz-Saldierna, LH. Switching regulator based on switched-inductor SEPIC DC-DC converter with a continuous input current for lithium-ion batteries. IET Power Electron. 2021; 14: 982– 991. https://doi.org/10.1049/pel2.12080
dc.identifier.urihttp://hdl.handle.net/11627/5758
dc.description.abstract"This study discusses a control strategy applied to the switched-inductor single-ended primary-inductance converter (SEPIC) converter suitable for applications where the voltage delivered by a DC source varies from above or below the nominal value. The SEPIC converter can provide a non-isolated positive output voltage for the above applications; moreover, it exhibits better characteristics when combined with a switched-inductor cell. A design-oriented procedure is given that appropriately selects the elements of the converter for a given output voltage and power delivery requirements. A control scheme with two loops is chosen. A high-gain compensator is used in the inner loop such that the average inductor current follows a current reference. A proportional integral (PI) controller is used in the outer loop for output voltage regulation. The controller was designed using loop-shaping techniques and applied to regulate an output voltage of 21 V. The design was verified with experimental results in a switching regulator where step changes were applied to the load. The performance of the switching regulator was also tested for variations of the input voltage."
dc.publisherWiley
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subject.classificationINGENIERÍA Y TECNOLOGÍA
dc.titleSwitching regulator based on switched-inductor SEPIC DC-DC converter with a continuous input current for lithium-ion batteries
dc.typearticle
dc.identifier.doihttps://doi.org/10.1049/pel2.12080
dc.rights.accessAcceso Abierto


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivatives 4.0 Internacional